High Quality Trunk Take up Machine Cable Discharging Coiler

Get the best High Quality Trunk Take up Machine Cable Discharging Coiler from our factory. Trust the experts for top-notch cable coiling solutions.
Request a Quote

PRODUCTS DETAILS

Basic Info.

Model NO.
XB500-600
Max. Number of Block
10
Certification
REACH, RoHS, ISO
Condition
New
Weight
1500kgs
Coulor
Any Coulor
Motor Power
15-30kw
Transport Package
PE
Specification
1500*1500*2000MM
Origin
China
HS Code
8479819000
Production Capacity
1000 Set One Year

Product Description

Detailed Description:

Frame

  It is the foundation of coiler. It is welded by steel plate and required bent steel plate. It is welded to box type on the base of the bottom. Machine main board is based on the installation of main axis and horizontal capstan.

 

Horizontal capstan

  Φ600m material is ZG45 cast steel, through quenching and tempering treatment after rough lathing. There's no pore and trachoma and other casting defect. The capstan is composed of inner and outer capstan. Inner capstan is supported on the spindle by bearing. Outer capstan inlays on the matching ring of inner capstan which is fixed by seal circle and bolts, make the inside part form an inclosed cooling water jacket.

  Outer capstan working surface thermal sprays tungsten nickel-based alloy powder, melt into denser hardened coating layer. Coating height 300mm, depth more than 0.5mm, HRC58-62.

 

Drawing die box and water-cooling system

  Theory: The principal axis and the flyer are cooperated still. The die box can be adjustable is fitted on the flyer. Because of the water inlet and output holes, it can realize the water cooling in the die box by the soft pipe and joints. At the other side of the principal axis there is a mechanical sealed packet, which could push the water from outside into the principal axis and then send the cooling water from inside to outside again. It is this process that achieves the water circulation between the capstans on the take-up machine and dies box.

--------------

1. Features

 

1. Trunk take up machine is used behind the wire drawing machine for contimuous, uninterrupted production and increasing the productivity.

.

2. Trunk take up machine with non-rotation drum enabled the finished wire to be taken out continuously.

 

3. The equipment is very suitable for taking up high intensity wires after drawing.

 

4. Compared with common take-up machine, it has an additional calibration module that the straightness of steel wire is improved.

 

5. Its capstan applies water cooling and air cooling, water cooling for calibration module can improve the qu

ality of steel wire.

High quality Trunk take up machine cable discharging coiler

High Quality Trunk Take up Machine Cable Discharging Coiler
High Quality Trunk Take up Machine Cable Discharging Coiler
High Quality Trunk Take up Machine Cable Discharging Coiler
High Quality Trunk Take up Machine Cable Discharging Coiler
High Quality Trunk Take up Machine Cable Discharging Coiler
High Quality Trunk Take up Machine Cable Discharging Coiler

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours